| ۲۱ | Finite element simulation to evaluate the effects of the secondary rolling process on the residual stress of aluminum sheet after the constrained groove pressing process | S.E. Eftekhari Shahri, M. Naderi Samani, and A. Saghafi | the 19th National Conference and the 8th International Conference on Manufacturing Engineering- ICME2023 | 2023-03-09 | مقاله در همایش |
| ۲۲ | Investigating the mechanical properties and microstructure of magnesium alloy AZ31 reinforced with graphene nanoplates in the process of severe plastic deformation | M.K. Salari, A. Saghafi, S.E. Eftekhari Shahri and R. Khoshhal | the 19th National Conference and the 8th International Conference on Manufacturing Engineering- ICME2023 | 2023-03-09 | مقاله در همایش |
| ۲۳ | Experimental study on the effects of constrained groove pressing process on 6061 aluminum sheet | M. Gholami, S.E. Eftekhari Shahri, and M. Rakhshkhorshid | the 19th National Conference and the 8th International Conference on Manufacturing Engineering- ICME2023 | 2023-03-09 | مقاله در همایش |
| ۲۴ | Numerical study of constrained groove pressing process of steel sheet using polyurethane rubber pad | A. Azhdari, A. Saghafi, S.E. Eftekhari Shahri | 30th Annual Conference on Mechanical Engineering‐ISME2022 | 2022-05-10 | مقاله در همایش |
| ۲۵ | Modification of mechanical properties in the CGP process of 6061 aluminum sheet using polyurethane rubber pad | A. Azhdari, S.E. Eftekhari Shahri, and A. Saghafi | the 7th International Conference and the 18th National Conference on Manufacturing Engineering- ICME2022 | 2022-03-02 | مقاله در همایش |
| ۲۶ | Investigating the effects of temperature and immersion time on the growth kinetics of the intermetallic layer in the aluminizing process of st37 | G.H. Bazi, A. Saghafi, R. khoshhal, and S.E. Eftekhari Shahri | the 7th International Conference and the 18th National Conference on Manufacturing Engineering- ICME2022 | 2022-03-02 | مقاله در همایش |
| ۲۷ | Experimental and numerical investigation of the effect of preheat temperature on the behavior of the chip and the forces on the tool in the machining process of CK45 steel | S.E. Eftekhari Shahri, S.M. Sedehi, H. Izadi | the 7th International Conference and the 18th National Conference on Manufacturing Engineering- ICME2022 | 2022-03-02 | مقاله در همایش |
| ۲۸ | Investigation of the die corner radius effects on the constrained groove pressing (CGP) process | A. Azhdari, G.H. Bazi, A. Saghafi and S.E. Eftekhari Shahri | the 6th International Conference and the 17th National Conference on Manufacturing Engineering- ICME2021 | 2021-03-02 | مقاله در همایش |
| ۲۹ | Experimental study of the effects of CGP process on the mechanical properties of aluminum and St37 sheets | S.E. Fatemi, M. Barani, S.E. Eftekhari Shahri and A. Saghafi | the 6th International Conference and the 17th National Conference on Manufacturing Engineering- ICME2021 | 2021-03-02 | مقاله در همایش |
| ۳۰ | Finite element simulation of a complete pass in aluminum sheet deformation process using constrained groove pressing (CGP) | M. Gholami, S.E. Eftekhari Shahri, M. Rakhsh khorshid, and F. Nazari | the 5th International Conference and the 16th National Conference on Manufacturing Engineering- ICME2019 | 2019-12-25 | مقاله در همایش |
| ۳۱ | Numerical study of mechanical and thermal behavior in electrical discharge machining process | S.E. Eftekhari Shahri, Y. Khoshnood, and H. Jamshidi | 27th Annual (International) Conference on Mechanical Engineering‐ISME2019 | 2019-04-30 | مقاله در همایش |
| ۳۲ | Numerical analysis of the Constrained Groove Pressing process and mold angle and sheet material evaluation | M. Gholami, S.E. Eftekhari Shahri, M. Lakhi, and M. Khosravi | 27th Annual (International) Conference on Mechanical Engineering‐ISME2019 | 2019-04-30 | مقاله در همایش |
| ۳۳ | K. Shiri, S.E. Eftekhari Shahri, H. Rastegari Kupaei, and F. Barati | Study of the effect of H nanocomposite patch on crack growth behavior in Al5251 | The Fourth International Conference and the 15th National Conference on Manufacturing Engineering- ICME2018 | 2018-10-24 | مقاله در همایش |
| ۳۴ | Effect of post-annealing on microstructure and mechanical properties of copper tube produced by severe plastic deformation | S. Guya, S.E. Eftekhari Shahri, M. Maraki, and A. Ranaii | 26th Annual (International) Conference on Mechanical Engineering‐ISME2018 | 2018-04-25 | مقاله در همایش |
| ۳۵ | Investigating the effect of severe plastic deformation with radial strain on the properties of copper wire in wire drawing | S.E. Eftekhari Shahri, E. Rezaii, M. Maraki, and A. Ranaii | 26th Annual (International) Conference on Mechanical Engineering‐ISME2018 | 2018-04-25 | مقاله در همایش |
| ۳۶ | Screw analysis which is more resistant against bearing stress due to torque (Curved head screw) and its comparison with double screw | M. lakhi and S.E. Eftekhari Shahri | 13th Conference on Manufacturing Engineering (ICME2016) | 2016-11-18 | مقاله در همایش |
| ۳۷ | Finite element analysis of T-Shaped forming process using ball forming method | H. Yazdani, k. khalili, and S.E. Eftekhari Shahri | 3rd National Conference and 1st International conference on applied researches in electrical- mechanical & Mechatronic Engineering | 2016-02-17 | مقاله در همایش |
| ۳۸ | Design of hydroforming die using the advantages of vibrations | S.E. Eftekhari Shahri, S.Y. Ahmadi Brooghani, and K. Khalili | 23th Annual (International) Conference on Mechanical Engineering‐ISME2015 | 2015-05-12 | مقاله در همایش |
| ۳۹ | Deformation of the tube section geometry using tube hydroforming process | S.E. Eftekhari Shahri, S. Pasdar, and Y. Rostamian | 23th Annual (International) Conference on Mechanical Engineering‐ISME2015 | 2015-05-12 | مقاله در همایش |
| ۴۰ | Determination of Wrinkling in the T-shaped piece produced by hydroforming process | K. Khalilli, S.E. Eftekhari Shahri, and P. Kahhal | 19th Annual Conference on Mechanical Engineering‐ISME2011 | 2011-05-16 | مقاله در همایش |