رزومه


EN
سیداحسان افتخاری شهری

سیداحسان افتخاری شهری

استادیار

e.eftekhari@birjandut.ac.ir

دانشکده/پردیس: دانشکده مهندسی مکانیک و مواد

گروه/دانشکده گروه مهندسی مکانیک

مقطع تحصیلی: دكتری حرفه ای

رزومه
EN
سیداحسان افتخاری شهری

استادیار سیداحسان افتخاری شهری

e.eftekhari@birjandut.ac.ir
دانشکده/پردیس: دانشکده مهندسی مکانیک و مواد - گروه/دانشکده گروه مهندسی مکانیک مقطع تحصیلی: دكتری حرفه ای |

مقالات

#عنوان مقالهنویسندگاننشریه/همایشتاریخنوع
 
۱Using X-ray diffraction to evaluate residual stress changes caused by direct and reverse rolling process to 1020 CGP aluminum sheetM. Naderi Samani, S. E. Eftekhari Shahri, A. Saghafi20th National Conference and 9th International Conference of Manufacturing Engineering- ICME20242024مقاله در همایش
۲Residual stress reduction in deformed sheets of pure aluminum and aluminum 6061 with rolling operationM. Naderi Samani, S. E. Eftekhari Shahri, A. Saghafi20th National Conference and 9th International Conference of Manufacturing Engineering-ICME20242024مقاله در همایش
۳Investigation of the mechanical properties of aluminum-graphene composite sheets produced by accumulative roll bonding methodS. E. Fatemi, S. E. Eftekhari Shahri, A. Saghafi, Y. YagoubiNejad20th National Conference and 9th International Conference of Manufacturing Engineering- ICME20242024مقاله در همایش
۴Studying the effects of preheat temperature on the turning process of CK45 steel. Iranian Journal of Manufacturing Engineering.Eftekhari Shahri SE, Sedehi SM, Izadi H.Iranian Journal of Manufacturing Engineering2023مقاله در نشریه
۵Studying the effect of forming at the dynamic recrystallization activation threshold temperature on mechanical properties of copper produced by tube cyclic extrusion– compressionA. Afsari, S. E. Eftekhari Shahri, H. Bohluli, M. A. RanaeiJournal of mechanical engineering of Tabriz University2023مقاله در نشریه
۶Numerical and experimental investigation of the ultrasonic vibration effects on the tube hydroforming process in a die with a square cross-sectionS.E. Eftekhari Shahri- M. Lakhi- and I. TaheridoustabadInternational journal of advanced manufacturing technology2023مقاله در نشریه
۷The effect of sintering and compaction conditions on the microstructure and properties of AZ31 magnesium alloyAmin Saghafi, Seyed Ehsan Eftekhari Shahri, Hossein Jamshidi, Mohammad Kazem Salari, Razieh KhoshhalAdvanced Design and Manufacturing Technology (ADMT)2023مقاله در نشریه
۸Numerical-experimental study of die geometry in the constrained groove pressing of 6061 aluminum sheetsS.E. Eftekhari Shahri- M. Gholami and M. RakhshkhorshidProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture2023مقاله در نشریه
۹Experimental Study of the Effects of Rectangular and H-Shaped Woven Nanocomposites Patch on tensile properties of Repaired AL5251 SheetsK. Shiri, S.E. Eftekhari Shahri, and H. Rastegari KoupaiiModares Mechanical Engineering2022مقاله در نشریه
۱۰Experimental study of the simultaneous effects of severe plastic deformation and secondary radial strain on copper, Journal of Process Mechanical EngineeringS.E. Eftekhari Shahri, M.A. Ranaei, H. Jamshidi, and E. RezaeiProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering2021مقاله در نشریه
۱۱Measurement of local strain: machine vision and finite element method, Journal of Mechanical Science and TechnologyS.E. Eftekhari Shahri, M. Lakhi, and S. RanjbarJournal of Mechanical Science and Technology2021مقاله در نشریه
۱۲Determination of Johnson-Cook Damage Model Constants for commercial Pure Copper Sheet by Tensile Testing on Notched SpecimensM. Rakhshkhorshid, S. Ranjbar, and S.E. Eftekhari ShahriJournal of Solid and Fluid Mechanics2021مقاله در نشریه
۱۳Design of tube Hydroforming system with the Die Ultrasonic VibrationS.E. Eftekhari Shahri, S.Y. Ahmadi Brooghani, and K. Khalilihttps://jsfm.shahroodut.ac.ir/article_412.html2015مقاله در نشریه
۱۴Ultrasonic tube hydroforming, a new method to improve formabilityS.E. Eftekhari Shahri, S.Y. Ahmadi Boroughani, and K. Khalili, B.S. KangProcedia Technology2015مقاله در نشریه
۱۵Improve the formability in tube Hydroforming process using ultrasonic vibrationsS.E. Eftekhari Shahri, S.Y. Ahmadi Brooghani, K. Khalili, and A. MohammadiModares Mechanical Engineering2014مقاله در نشریه
۱۶Optimization of loading curve in tube hydroforming process using multilevel response surfaceS.E. Eftekhari Shahri, K. Khalili, and S.Y. Ahmadi BrooghaniModares Mechanical Engineering2014مقاله در نشریه
۱۷Loading path optimization of a hydroformed part using multilevel response surface methodS.Y. Ahmadi Brooghani. K. Khalili, S.E. Eftekhari Shahri, and B.S. KangThe International Journal of Advanced Manufacturing Technology2013مقاله در نشریه
۱۸Ultrasonic tube hydroforming, a numerical and analytical studyS.E. Eftekhari Shahri, S.Y. Ahmadi Brooghani, K. Khalili, and B.S. KangModares Mechanical Engineering2013مقاله در نشریه
۱۹Blank Optimization in Elliptical-Shape Sheet Metal Forming Using Response Surface Model Coupled with Reduced Basis Technique and Finite Element AnalysisK. Khalili, P. Kahhal, S.E. Eftekhari Shari, and M.S. KhaliliKey Engineering Materials2011مقاله در نشریه
۲۰Wrinkling study in tube hydroforming processK. Khalili, S.E. Eftekhari Shari, P. Kahhal, and M.S. KhaliliKey Engineering Materials2011مقاله در نشریه
نمایش ۱ تا ۲۰ مورد از کل ۴۹ مورد.